Ansprechpartner : Shirley

Telefonnummer : +8613603020068

WhatsApp : +8613603020068

Custom Connector Terminal Shrapnel – High Precision Metal Stamping for Automotive Electronics

Herkunftsort	Shenzhen, China
Markenname	TF
Zertifizierung	lSO9001
Modellnummer	Die Daten sind in der Liste aufgeführt.
Min Bestellmenge	1
Preis	0.07-0.23USD
Verpackung Informationen	Kartonverpackung 181512cm (Verpackung kann je nach Produktanforderungen des Kunden angepasst werde
Lieferzeit	3 Tage/Start
Zahlungsbedingungen	T/T
Versorgungsmaterial-Fähigkeit	10000000 Stück/pro Monat

Produktdetails

Produkttyp	Automotive-Steckverbinderklemmen-Schrapnell-/Fahrzeugsignalkontakte/ECU-Steckverbinderklemmen	Hauptmaterial	Messing / Phosphorbronze / Berylliumkupfer / Edelstahl
Materialstärke	0,15–0,25 mm/0,25–0,4 mm/0,4–0,6 mm	Prozesstyp	Hochpräzises progressives Stanzen / Feinstanzen / Biegeumformen / selektive Beschichtung
Oberflächenbeschaffenheit	Verzinnen / Vergolden / Versilbern / Selektive Beschichtung	Paarungszyklen	≥5000 Zyklen / ≥10000 Zyklen / ≥20000 Zyklen
Toleranzqualität	Präzision (±0,02 mm) / Hochpräzise (±0,01 mm)	Betriebstemperatur	-40°C bis +105°C / -40°C bis +150°C
Hervorheben	custom connector terminal shrapnel , high precision metal stamping parts , automotive electronics connector terminal

Hinterlass eine Nachricht

Produkt-Beschreibung

Custom Connector Terminal Shrapnel – High Precision Metal Stamping for Automotive Electronics Tingfeng Hardware provides custom connector terminal shrapnel specifically for automotive electronics, manufactured from brass, phosphor bronze, and beryllium copper through high-precision progressive die stamping and selective plating processes. Products comply with IATF 16949 automotive quality system requirements, with PPAP Level 3 documentation support. With 16 years of precision

Bewertungen & Überprüfung

Gesamtbewertung

5.0

Basierend auf 50 Bewertungen für diesen Lieferanten

Rating-Schnappschuss

Nachstehend wird die Verteilung aller Ratings dargestellt.

5 Sterne

100%

4 Sterne

3 Sterne

2 Sterne

1 Sterne

Alle Bewertungen

E*r

Netherlands Antilles Apr 23.2026

Hilfreich (1)

We bought stamped brackets for an industrial cabinet. Nothing fancy. Delivery was on time, packaging was sturdy, and all 500 pieces were within drawing tolerances. One small complaint: the surface had some light scratching, but it’s for indoor use so not a big deal. Would order again for non-cosmetic parts.

K*r

Germany Mar 18.2026

Hilfreich (2)

Used them for a deep drawn stainless steel part that we previously imported from Italy with long lead times. The quality is comparable, and the price was about 12% lower. Delivery took 18 days instead of 15, but they informed me proactively. Good enough for a trial order. Will see how mass production goes.

S*t

France Mar 14.2026

Hilfreich (3)

Ordered 200 small stamped clips for a sensor housing. The critical slot tolerance was specified as ±0.02mm. My incoming inspection showed 197 pieces within spec, 3 pieces at 0.023mm – still usable for our prototype. They included a CMM report which matched my measurements mostly. Acceptable for a first run.

Umbauten:

Custom Connector Terminal Shrapnel – High Precision Metal Stamping for Automotive Electronics