Alle Produkte
Ansprechpartner : Shirley
Telefonnummer : +8613603020068
WhatsApp : +8613603020068

Precision Non-Standard Stamped Spring Contacts for Encoder & Sensor PCBs – 1M+ Cycles

  • Precision Non-Standard Stamped Spring Contacts for Encoder & Sensor PCBs – 1M+ Cycles
  • Precision Non-Standard Stamped Spring Contacts for Encoder & Sensor PCBs – 1M+ Cycles
  • Precision Non-Standard Stamped Spring Contacts for Encoder & Sensor PCBs – 1M+ Cycles
  • Precision Non-Standard Stamped Spring Contacts for Encoder & Sensor PCBs – 1M+ Cycles
Herkunftsort Shenzhen, China
Markenname TF
Zertifizierung lSO9001
Modellnummer Die Daten sind in der Liste aufgeführt.
Min Bestellmenge 1
Preis 0.07-0.23USD
Verpackung Informationen Kartonverpackung 18*15*12cm (Verpackung kann je nach Produktanforderungen des Kunden angepasst werde
Lieferzeit 3 Tage/Start
Zahlungsbedingungen T/T
Versorgungsmaterial-Fähigkeit 10000000 Stück/pro Monat
Produktdetails
Produkttyp Nicht standardmäßige Encoder-Federkontakte / Kundenspezifische Sensor-Leiterplattenanschlüsse / Gest Hauptmaterial Berylliumkupfer C17200 / Phosphorbronze / vergoldeter Stahl
Materialstärke 0,05–0,1 mm/0,1–0,15 mm/0,15–0,2 mm Prozesstyp Präzises progressives Stanzen / Biegeformen / Wärmebehandlung zur Spannungsentlastung / Nicht standa
Oberflächenbeschaffenheit Vergoldung / Versilberung / Vernickelung Kontakt ≤5mΩ / ≤10mΩ
Toleranzgrad Hochpräzise (±0,01 mm) / Ultrahochpräzision (±0,005 mm) Zyklus Leben ≥1.000.000 Zyklen / ≥3.000.000 Zyklen
Hervorheben

stamped spring contacts for encoder PCBs

,

precision non-standard spring contacts

,

1M+ cycle stamped spring contacts
Hinterlass eine Nachricht
Produkt-Beschreibung
Tingfeng Hardware provides non-standard stamped spring contacts for encoder and sensor PCBs, manufactured from BeCu C17200 with force decay under 10% after 1 million rotation or sliding cycles, contact resistance ≤5mΩ, and tolerance of ±0.005mm. With 16 years of precision manufacturing experience, we understand that encoders and sensors demand long-term signal stability and maintenance-free operation — our spring contact solution directly serves this requirement and provides
Bewertungen & Überprüfung

Gesamtbewertung

5.0
Basierend auf 50 Bewertungen für diesen Lieferanten

Rating-Schnappschuss

Nachstehend wird die Verteilung aller Ratings dargestellt.
5 Sterne
100%
4 Sterne
0%
3 Sterne
0%
2 Sterne
0%
1 Sterne
0%

Alle Bewertungen

D
D*n
Ireland Mar 31.2026
Hilfreich (2)
Needed a fine blanked connector part with zero burr on the shear edge. Other vendors quoted high tooling cost. Tingfeng‘s tooling was 20% less expensive, and the sample parts arrived with clean edges – no secondary deburring needed. We’ve placed a production order for 5,000 pieces. So far, so good.
K
K*r
Germany Mar 18.2026
Hilfreich (2)
Used them for a deep drawn stainless steel part that we previously imported from Italy with long lead times. The quality is comparable, and the price was about 12% lower. Delivery took 18 days instead of 15, but they informed me proactively. Good enough for a trial order. Will see how mass production goes.
S
S*t
France Mar 14.2026
Hilfreich (3)
Ordered 200 small stamped clips for a sensor housing. The critical slot tolerance was specified as ±0.02mm. My incoming inspection showed 197 pieces within spec, 3 pieces at 0.023mm – still usable for our prototype. They included a CMM report which matched my measurements mostly. Acceptable for a first run.
Umbauten:

Hochpräzises Metallstanzen nach Maß

Stabile Präzisionsstanzteile

Präzisions-Metallstanzteile mit engen Toleranzen