すべての製品
Precipitation Hardened High Fatigue Life Custom Ring Groove 17 4 Ph Stainless Steel Self Locking Nut
| 起源の場所 | 深セン、中国 |
|---|---|
| ブランド名 | TF |
| 証明 | lSO9001 |
| モデル番号 | TF-004 |
| 最小注文数量 | 1 |
| 価格 | 0.01-0.28 |
| パッケージの詳細 | カートン包装 18*15*12cm (顧客の製品要件に応じて包装をカスタマイズできます) |
| 受渡し時間 | 3日間/開始 |
| 支払条件 | T/T |
| 供給の能力 | 10000000個/月 |
商品の詳細
| 材料 | 17-4PH ステンレス鋼（析出硬化処理） | 熱処理 | H900条件、引張≧1300MPa |
|---|---|---|---|
| 疲労寿命 | 動的荷重（ロボット工学、サスペンション）向けに設計 | リンググルーブ | スナップリングまたは止め輪の図面に従ってカスタム |
| 耐摩耗性 | 優れた高寸法安定性 | セルフロックの再利用性 | 重大なトルク損失なしで 15 回以上再利用可能 |
| 応用 | ロボット関節、レーシングサスペンション、高振動機構 | 検査 | 硬さ試験＋トルクサイクル試験 |
| ハイライト | 17-4 PH stainless steel self-locking nut,precipitation hardened ring groove nut,high fatigue life self clinching fastener |
||
製品の説明
Precipitation Hardened High Fatigue Life Custom Ring Groove 17-4PH Stainless Steel Self Locking Nut
17-4PH Stainless Steel Self Locking Nut with Custom Ring Groove for High Fatigue Applications. Under high-fatigue conditions, ordinary self-locking nuts have insufficient life. Our 17-4PH precipitation hardened self-locking nuts are H900 heat treated to 1300MPa tensile strength, specifically designed for dynamic loading. Custom ring groove allows snap ring installation for secondary locking. Ideal for robot joints, racing suspension, drone rotor mechanisms. 48hr sampling.
Enhanced Performance for Soft Materials
In robot joints, racing suspension, or high-speed rotating mechanisms, fasteners endure frequent tension-compression cycles and vibration. Ordinary stainless steel self-locking nuts may loosen after millions of cycles due to fatigue. 17-4PH precipitation hardened stainless steel, through H900 aging treatment, achieves ultra-high strength while maintaining good toughness, with fatigue limits far exceeding 304 or 316.
In robot joints, racing suspension, or high-speed rotating mechanisms, fasteners endure frequent tension-compression cycles and vibration. Ordinary stainless steel self-locking nuts may loosen after millions of cycles due to fatigue. 17-4PH precipitation hardened stainless steel, through H900 aging treatment, achieves ultra-high strength while maintaining good toughness, with fatigue limits far exceeding 304 or 316.
We offer custom ring groove service: you specify groove position, width, and depth for installing a snap ring or retaining ring, providing mechanical backup locking—even if the self-locking feature fails, the nut will not come off. This dual locking design has been proven in aerospace and racing applications. 17-4PH also offers good corrosion resistance, comparable to 304. Fatigue test data is available upon request. 15 years experience—providing the most reliable locking for your dynamic mechanisms.
Features & Advantages
| Feature | Advantage to You |
|---|---|
| 17-4PH precipitation hardened | 1300MPa tensile; fatigue life far exceeds standard stainless |
| Custom ring groove | Allows snap ring for mechanical backup locking; dual protection |
| H900 heat treatment | Balanced strength and toughness; impact resistant |
| Self-locking reusable 15+ times | No nut replacement during maintenance; reduces after-sales cost |
| Corrosion resistance | Comparable to 304; suitable for most environments |
Product Specifications
| Specification Item | Detail / Capability | Notes / Description |
|---|---|---|
| Thread Size | M3 - M10 | Larger on request |
| Material Condition | 17-4PH H900 | Hardness ≥40 HRC |
| Tensile Strength | ≥ 1300 MPa | After heat treatment |
| Ring Groove Position | Custom per drawing | Recommended on flange face or thread root |
| Groove Width/Depth | 0.5 - 2.0mm / 0.2 - 1.0mm | For standard snap rings |
| Self-locking Reusability | ≥15 cycles, torque loss <20% | Test report available |
| Salt Spray Resistance | ≥ 200 hours | Natural finish |
| Sample Lead Time | 5-7 days | Includes ring groove machining |
Product Applications
Collaborative Robot Joints: Fastening at harmonic drive outputs; withstands frequent start/stop and reverse impacts.
EV Racing Suspension Links: Rod end bearing fixation in push-rod suspension; high fatigue life ensures race safety.
Helicopter Rotor Hubs: Dynamic component connections; ring groove + snap ring prevents catastrophic failure from loosening.
Frequently Asked Questions
Can you handle complex custom designs and provide design optimization suggestions?
Absolutely. This is our core expertise. We provide free DFM analysis within 3-5 days, often helping clients achieve 15-30% cost reduction through design for manufacturability.
How do you ensure quality consistency and handle defect issues?
We implement a rigorous 4-stage QC system with 100% full inspection. Our track record shows 99.99% qualification rate.
What are your lead times and how do you handle urgent orders?
Standard lead times: 3-7 days for prototypes, 7-15 days for mass production. We offer VIP prioritization cutting lead times by up to 30%.
Will I get timely responses and professional support throughout the project?
Yes. You get a 1v1 exclusive consultant with 1-hour initial response commitment and 24-hour technical support.
Can you provide material certifications and environmental compliance reports?
Yes. We provide material certifications and environmental test reports (RoHS, REACH compliant) upon request.
How do you protect my designs and intellectual property?
We start with mutual NDA and implement strict mold ownership protection and confidential data security measures.
What are your payment terms and MOQ requirements?
We offer flexible payment terms (T/T, L/C at sight) and MOQ from 1 piece for prototyping.
評価とレビュー
推薦されたプロダクト
-
VIDEO
総格付け
評価のスナップショット
すべての評価の分布は以下の通りですすべてのレビュー