：Custom Stamped Contact Shrapnel for Power Distribution Modules – High-Conductivity Copper Alloy

Plaats van herkomst	Shenzhen, China
Merknaam	TF
Certificering	lSO9001
Modelnummer	TF-001
Min. bestelaantal	1
Prijs	0.07-0.23USD
Verpakking Details	Kartonnen verpakking 18 * 15 * 12 cm (verpakking kan worden aangepast aan de productvereisten van de
Levertijd	3 dagen/begin
Betalingscondities	T/T
Levering vermogen	10000000 stuks/per maand

Productdetails

Producttype	Aangepaste stroomdistributiegranaatscherven / hoogstroomschakelaarcontacten / gestempelde granaatsch	Hoofdmateriaal	Zuiver koper / koperlegering / berylliumkoper
Materiaal dikte	0,15-0,25 mm / 0,25-0,4 mm / 0,4-0,6 mm	Procestype	Precisie progressief stempelen / buigen vormen / selectief verzilveren / hittebehandeling tegen stre
Oppervlakteafwerking	Verzilveren / vertinnen / vernikkelen	Neem contact op met Weerstand	≤5mΩ / ≤10mΩ
Nominale stroom	63A / 125A / 200A / 400A	Bedrijfstemperatuur	-40°C tot +125°C / -40°C tot +150°C
Markeren	Custom Stamped Contact Shrapnel , High-Conductivity Copper Alloy Shrapnel , Precision Stamped Power Distribution Parts

Laat een bericht achter

Productomschrijving

Tingfeng Hardware provides custom stamped contact shrapnel for power distribution modules, specializing in high-conductivity, high-current requirements. A pure copper or copper alloy substrate with selective silver plating achieves contact resistance below 5mΩ, with rated current covering 63A to 400A. With 16 years of precision manufacturing experience, we support non-standard geometry customization and 100% contact resistance inspection, helping power distribution module

Beoordelingen en recensie

Algemene Beoordeling

5.0

Gebaseerd op 50 beoordelingen voor deze leverancier

Beoordelingsmomentopname

Het volgende is de verdeling van alle beoordelingen

5 sterren

100%

4 sterren

3 sterren

2 sterren

1 sterren

Alle recensies

S*t

France Mar 14.2026

Het is nuttig. (3)

Ordered 200 small stamped clips for a sensor housing. The critical slot tolerance was specified as ±0.02mm. My incoming inspection showed 197 pieces within spec, 3 pieces at 0.023mm – still usable for our prototype. They included a CMM report which matched my measurements mostly. Acceptable for a first run.

S*t

France Mar 14.2026

Het is nuttig. (3)

United States Feb 28.2026

Het is nuttig. (3)

We had a stamped bracket with an unusual bend that two local shops declined. Tingfeng took it on. The first sample had one minor dimension off by 0.1mm, but they fixed it on the second try and covered the extra shipping. End result works fine for our assembly. No issues so far.

Markeringen:

：Custom Stamped Contact Shrapnel for Power Distribution Modules – High-Conductivity Copper Alloy