Người liên hệ : Shirley
Số điện thoại : +8613603020068
WhatsApp : +8613603020068

Precision Stamped Grounding Contact Shrapnel for ADAS Radar PCBs – Non-Standard Wide Temperature

Nguồn gốc Thâm Quyến, Trung Quốc
Hàng hiệu TF
Chứng nhận lSO9001
Số mô hình TF-001
Số lượng đặt hàng tối thiểu 1
Giá bán 0.07-0.23USD
chi tiết đóng gói Bao bì carton 18 * 15 * 12cm (bao bì có thể tùy chỉnh theo yêu cầu sản phẩm của khách hàng)
Thời gian giao hàng 3 ngày/Bắt đầu
Điều khoản thanh toán T/T
Khả năng cung cấp 10000000 chiếc / mỗi tháng
Thông tin chi tiết sản phẩm
Loại sản phẩm Mảnh đạn nối đất PCB của radar ADAS không tiêu chuẩn / Tiếp điểm tấm chắn nhiệt độ rộng / Thiết bị đ Vật liệu chính Hợp kim đồng / Đồng berili / Thép mạ thiếc
Độ dày vật liệu 0,1-0,2mm / 0,2-0,3mm / 0,3-0,5mm Loại quy trình Dập khuôn tiến bộ chính xác / Tạo hình uốn / Tùy chỉnh không chuẩn / Dập nổi
Bề mặt hoàn thiện Mạ thiếc / Mạ vàng / Mạ niken Điện trở tiếp xúc 10mΩ / 20mΩ
Tần số hoạt động 24GHz / 77GHz / 79GHz Nhiệt độ hoạt động -40°C đến +125°C / -40°C đến +150°C
Làm nổi bật

ADAS radar PCB grounding contact shrapnel

,

wide temperature precision stamped shrapnel

,

non-standard grounding contact stamping parts

Để lại lời nhắn
Mô tả sản phẩm
Precision Stamped Grounding Contact Shrapnel for ADAS Radar PCBs Tingfeng Hardware supplies non-standard stamped grounding contact shrapnel engineered for ADAS radar PCBs. Manufactured from copper alloy with tin plating, these contacts deliver contact resistance of ≤10mΩ and operate across a wide temperature range of -40°C to +150°C, supporting 24GHz, 77GHz, and 79GHz radar platforms. Backed by 16 years of precision manufacturing experience, IATF 16949 process control, and
Xếp hạng & Đánh giá

Đánh giá chung

5.0
Dựa trên 50 đánh giá về nhà cung cấp này

Ảnh chụp nhanh về xếp hạng

Sau đây là phân phối của tất cả các xếp hạng
5 sao
100%
4 sao
0%
3 sao
0%
2 sao
0%
1 sao
0%

Tất cả các đánh giá

D
D*n
Ireland Mar 31.2026
Needed a fine blanked connector part with zero burr on the shear edge. Other vendors quoted high tooling cost. Tingfeng‘s tooling was 20% less expensive, and the sample parts arrived with clean edges – no secondary deburring needed. We’ve placed a production order for 5,000 pieces. So far, so good.
K
K*r
Germany Mar 18.2026
Used them for a deep drawn stainless steel part that we previously imported from Italy with long lead times. The quality is comparable, and the price was about 12% lower. Delivery took 18 days instead of 15, but they informed me proactively. Good enough for a trial order. Will see how mass production goes.
*n
United States Feb 28.2026
We had a stamped bracket with an unusual bend that two local shops declined. Tingfeng took it on. The first sample had one minor dimension off by 0.1mm, but they fixed it on the second try and covered the extra shipping. End result works fine for our assembly. No issues so far.