تماس با شخص : Shirley
شماره تلفن : +8613603020068
WhatsApp : +8613603020068

Precision Stamped Grounding Contact Shrapnel for ADAS Radar PCBs – Non-Standard Wide Temperature

محل منبع شنژن، چین
نام تجاری TF
گواهی lSO9001
شماره مدل TF-001
مقدار حداقل تعداد سفارش 1
قیمت 0.07-0.23USD
جزئیات بسته بندی بسته بندی کارتن 18 * 15 * 12 سانتی متر (بسته بندی را می توان با توجه به نیاز محصول مشتری سفارشی کرد)
زمان تحویل 3 روز / شروع
شرایط پرداخت T/T
قابلیت ارائه 10000000 قطعه در هر ماه
جزئیات محصول
نوع محصول ترکش غیراستاندارد ADAS PCB رادار زمینی / مخاطبین محافظ با دمای گسترده / پایانه‌های زمین‌گیری سطح برد مواد اصلی آلیاژ مس / مس بریلیم / فولاد قلع اندود
ضخامت مواد 0.1-0.2mm / 0.2-0.3mm / 0.3-0.5mm نوع فرآیند مهر زنی دقیق پیشرونده قالب / شکل دهی خمشی / سفارشی سازی غیر استاندارد / برجسته سازی
پایان سطح آبکاری قلع / آبکاری طلا / آبکاری نیکل تماس با مقاومت ≤10mΩ / ≤20mΩ
فرکانس عملیاتی 24 گیگاهرتز / 77 گیگاهرتز / 79 گیگاهرتز دمای عملیاتی -40 درجه سانتی گراد تا +125 درجه سانتی گراد / -40 درجه سانتی گراد تا +150 درجه سانتی گراد
برجسته کردن

ADAS radar PCB grounding contact shrapnel

,

wide temperature precision stamped shrapnel

,

non-standard grounding contact stamping parts

پیام بگذارید
توضیحات محصول
Precision Stamped Grounding Contact Shrapnel for ADAS Radar PCBs Tingfeng Hardware supplies non-standard stamped grounding contact shrapnel engineered for ADAS radar PCBs. Manufactured from copper alloy with tin plating, these contacts deliver contact resistance of ≤10mΩ and operate across a wide temperature range of -40°C to +150°C, supporting 24GHz, 77GHz, and 79GHz radar platforms. Backed by 16 years of precision manufacturing experience, IATF 16949 process control, and
امتیازها و بررسی‌ها

امتیاز کلی

5.0
بر اساس 50 بررسی برای این تامین کننده

عکس درجه بندی

در زیر توزیع تمام امتیازات است.
5 ستاره‌ها
100%
4 ستاره‌ها
0%
3 ستاره‌ها
0%
2 ستاره‌ها
0%
1 ستاره‌ها
0%

تمام بررسی ها

D
D*n
Ireland Mar 31.2026
Needed a fine blanked connector part with zero burr on the shear edge. Other vendors quoted high tooling cost. Tingfeng‘s tooling was 20% less expensive, and the sample parts arrived with clean edges – no secondary deburring needed. We’ve placed a production order for 5,000 pieces. So far, so good.
K
K*r
Germany Mar 18.2026
Used them for a deep drawn stainless steel part that we previously imported from Italy with long lead times. The quality is comparable, and the price was about 12% lower. Delivery took 18 days instead of 15, but they informed me proactively. Good enough for a trial order. Will see how mass production goes.
*n
United States Feb 28.2026
We had a stamped bracket with an unusual bend that two local shops declined. Tingfeng took it on. The first sample had one minor dimension off by 0.1mm, but they fixed it on the second try and covered the extra shipping. End result works fine for our assembly. No issues so far.